Форум программистов «Весельчак У»
  *
Добро пожаловать, Гость. Пожалуйста, войдите или зарегистрируйтесь.
Вам не пришло письмо с кодом активации?

  • Рекомендуем проверить настройки временной зоны в вашем профиле (страница "Внешний вид форума", пункт "Часовой пояс:").
  • У нас больше нет рассылок. Если вам приходят письма от наших бывших рассылок mail.ru и subscribe.ru, то знайте, что это не мы рассылаем.
   Начало  
Наши сайты
Помощь Поиск Календарь Почта Войти Регистрация  
 
Страниц: [1]   Вниз
  Печать  
Автор Тема: Почему Network Load Balancing Manager позволяет только один ПС работает ?  (Прочитано 9642 раз)
0 Пользователей и 1 Гость смотрят эту тему.
buisyhanh
Постоялец

vn
Offline Offline

« : 26-12-2008 03:35 » 

 Люди, пожалуйста помогите мне разрабраться срочно !!!

 Я построил локальную сеть для поддержки Network Load Balancing на Windows Server 2003 Enterprise Edition R2 с параметрами:

 0. Switch : Micronet -
 1 - ПС:
   IP: 10.0.0.1
   Mask: 255.0.0.0
   DNS Server: 10.0.0.1

 2 - ПС:
   IP: 10.0.0.2
   Mask: 255.0.0.0
   DNS Server: 10.0.0.2

3. Cluster IP: 10.0.0.10   www.nlbtest.com / port range :80 and 80  / multcast / affinity:Single / Load weight: Equal.

Проблема в том, что: когда я создаю Новый Кластер, то могу прибавить только один компютер и это тот, на котором я запускал программу NLB Manager, а добавить второй компьютер не получиться: Host Unreachable. Хотя локальную сеть работает нормально.
 
 - Я думал, что: есть 3 источника ошибки: из за Switch; из - за Network Card on PC или Windows.

 Кто разбираете, подскажите пожалуйста ?

* Host Unreachable.JPG (74.31 Кб - загружено 1039 раз.)
« Последнее редактирование: 26-12-2008 03:41 от buisyhanh » Записан
4y4z
Участник

ru
Offline Offline
Младший саппорт


« Ответ #1 : 26-12-2008 07:45 » 

Сверься вот с этой инструкцией: http://www.samag.ru/cgi-bin/go.pl?q=articles;n=10.2004;a=06
Правильно ли сделал все шаги?
Записан

Ищу работу. (разработка/тестирование/отладка)
buisyhanh
Постоялец

vn
Offline Offline

« Ответ #2 : 26-12-2008 10:56 » 

 Я сделал все нормально все шаги. Но как видете на прикрепленном файле, не как не могу добавить второй ПС то Класстер.  Хотя выдает сообщение Update 2 Succeeded.
 Вообще есть похожая проблема:


IIS load Balancing/win 2003 with two NIC ..
Question: Hi
I am trying to do IIS Load Balancing on windows 2003 Server and with TWO NIC card.

My Configuration Details :
OS : windows 2003 Std Edition
NIC : RealTek 8139
1 Switch 10/100

I have created small Network with Two Servers and 1 Switch with 4 NIC Card.
I had given 192.168.10.190 as CLUSTER IP address,

IISLOAD 1
NIC 1 : 192.168.10.191
NIC 2 : 192.168.10.193

IISLOAD 2
NIC 1 : 192.168.10.192
NIC2 : 192.168.10.194

I have created First Server on IISLOAD1 but after that when I am adding second server to host it has added but message is "NLB NOT BOUND",

Second,
after applied LOAD BALANCE I am unable to PING Primary Ip address : 192.168.10.192.
but both machine can PING Cluster IP address 192.168.10.190..

Please help me !
soumenb

И дали такие примечания:
1. what subnet mask you have used in clustering
2.Are you use DHCP
3.Have you create VPN betwwen both computer
4. If you using any firewall are stop system firewall if enable when we use NLB then its on so you can not ping other computer.

И решали:
1.. Assign appropriate IP addresses to each NIC, placing them in separate
subnets.
·         Node1 -
    o       "Public" NIC
        §         IP address: 10.10.2.17 /as primary ip address
        §         Subnet: 255.255.255.0
        §         Gateway: 10.10.2.1 / as gateway
        §         DNS: as appropriate


    o       "NLB" NIC
        §         IP address: 192.168.1.1
        §         Subnet: 255.255.255.0
        §         Gateway: N/A
        §         DNS: N/A


·         Node2 -
    o       "Public" NIC
        §         IP address: 10.10.2.18
        §         Subnet: 255.255.255.0
        §         Gateway: 10.10.2.1
        §         DNS: as appropriate


    o       "NLB" NIC
        §         IP address: 192.168.1.2
        §         Subnet: 255.255.255.0
        §         Gateway: N/A
        §         DNS: N/A


 2.. On the "Public" NICs, click "Advanced" and add an additional IP
address as the Virtual IP Address which clients will connect to from the
Public network (i.e. - 10.10.2.177)

  3.. Install "Network Load Balancing" as an additional service from the
"Public" adapter properties.
    a.. Click "Install.." and then select "Service" in the upper-window and
click "Add."
    b.. Select "Network Load Balancing" in the upper-window and click "OK"
    c.. Answer any prompts and provide the correct path to installation
media.
  4.. Once NLB is installed, return to the Properties page for the "Public"
NIC and select the check-box next to "Network Load Balancing."  This enables
the service globally.
  5.. Next, select the item "Network Load Balancing" and click "Properties"
  6.. Configure the NLB Cluster properties according to your parameters,
using the following example steps as a guide.
·         Node1 -
    o       "Public" NLB Cluster Parameters tab
        §         Primary IP address: 10.10.2.177
        §         Subnet: 255.255.255.0
        §         Full Internet Name mail.domain.com


    o       "Public" NLB Host Parameters tab
        §         Priority: 1
        §         Dedicated IP address: 10.10.2.17
        §         Subnet: 255.255.255.0


·         Node2 -
    o       "Public" NLB Cluster Parameters tab
        §         Primary IP address: 10.10.2.177
        §         Subnet: 255.255.255.0
        §         Full Internet Name mail.domain.com


    o       "Public" NLB Host Parameters tab
        §         Priority: 2
        §         Dedicated IP address: 10.10.2.18
        §         Subnet: 255.255.255.0

  7.. MultiCast support can be optional in this configuration.

  8.. You can also now take time to create a static Host record (A record) in your scenario's DNS infrastructure to provide appropriate name resolution to the NLB cluster name (i.e. - mail.domain.com or just mail).

  9.. Your NLB cluster should be up and running.

  10.. An external client should now be able to ping the IP address of the NLB cluster (i.e. - 10.10.2.177) as well as each of the individual node addresses (i.e. - 10.10.2.17 & -.18).

  11.. Many good diagnostic commands can be found by typing "wlbs /?" in a command window.  For example, "wlbs query" shows the status and convergence state of the cluster.

  12.. IMPORTANT NOTE: In this configuration, each individual node is NOT able to ping the other node's Public physical IP address (i.e - 10.10.2.17 cannot ping 10.10.2.18 and vice-versa).  I believe this is expected behavior, as the NLB cluster is now responding to requests on the Virtual Cluster address (i.e. - 10.10.2.177).


 Я сделал такие ходы, но безполезен.
 Причем интересно что я наладил на Витуальных машинах нормально.
 
 
« Последнее редактирование: 26-12-2008 10:59 от buisyhanh » Записан
Страниц: [1]   Вверх
  Печать  
 

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines