inf158704
Участник
 Offline
|
 |
« Ответ #3 : 01-08-2013 06:05 »  |
|
Реализовать в хп это схему получилось, как и ланировал двумя драверами, usb-cом потом на сом повесил можем... все работает четко... а вот перенсти на 98 пока неполучаеться драйвер который подхлдит SYS есть и под 98 и под ХР проверял я их оба заменяя друг друга при установке в ХП, отличаются просто тем что вызов пары фукциий в ХП реализован из системы а для 98 функции в теле есть почему неполучилос в 98 тоже понимаю вроде inf файл там написан не для создания ком порта а просто устройство с именем и вот на это имя и должен потом вешаться модемный драйвер я такую схему вообще невстречал никогда и хочу у вас попросить подсказку как и на что он вешаеться, какая тут главная строка я думаю вот эта HKR,, SiemensPrivateModemGuid,1, D8, D0, 48, 95, 33, 07, bc, 4a, 88, 41, 39, 74, 3D, 40, ED, 88 но как расшифровать и изменить непойму вот драйвер модема: ;
; Installation file (.inf) for the USB Serial device driver.
;
; Copyright © 2004 Siemens AG
;
[Version]
Signature=$Windows95$
Provider=%S_Povider%
ClassGUID={4D36E96D-E325-11CE-BFC1-08002BE10318}
Class=Modem
DriverVer=06/30/2004,0.71.0.0
;
; Driver information
;
[Manufacturer]
%S_Mfg%=_Devices
[_Devices]
%Siemens.DeviceDesc0% = usbmod, USB\Siemensmpkit
;
; General installation section
;
[usbmod]
AddReg=Common_AddReg,Siemens_AddReg,Siemens_Addreg_Responses,Siemens_Addreg_FaxStd
[usbmod.HW]
AddReg=usbmod_HW
[usbmod_HW]
; the following comment is important for uninstalling/updating the driver
; !!! don't change this line !!!
; an additional key to identify our modem "{9548D0D8-0733-4abc-8841-39743D40ED88}"
HKR,, SiemensPrivateModemGuid,1, D8, D0, 48, 95, 33, 07, bc, 4a, 88, 41, 39, 74, 3D, 40, ED, 88
; general format of a registry line:
; HKR, <Path>, <Key>, <Format>, <Value> [,<Value>, ...]
[Common_AddReg]
; all modems described by this file use the UNIMODEM driver
HKR,, FriendlyDriver, , Unimodem.vxd
HKR,, DevLoader,,*vcomm
HKR,, ConfigDialog,, modemui.dll
HKR,, EnumPropPages,,"modemui.dll,EnumPropPages"
; modem is an external modem
HKR,, DeviceType, 1, 01
HKR,, PortSubClass, 1, 02
HKR,,PortDriver,,wdmmdmld.vxd
HKR,,Contention,0,
HKR,,ConfigDelay, 1, 9a,10,00,00
HKR,,Reset,, "AT&F<cr>"
HKR, Init, 1,, "AT&FE0V1&D2&C1Q0S0=0<cr>"
HKR, Init, 2,, "AT&FE0<cr>"
HKR, Init, 3,, "AT+FCLASS=0<cr>"
HKR, Monitor, 1,, "ATS0=0<cr>"
HKR, Monitor, 2,, "None"
HKR, Hangup, 1,, "ATH<cr>"
HKR, Hangup, 2,, "AT+CHUP<cr>"
HKR, Answer, 1,, "ATA<cr>"
HKR, Settings, Prefix,, "AT"
HKR, Settings, DialSuffix,, ";"
HKR, Settings, Terminator,, "<cr>"
HKR, Settings, DialPrefix,, "D"
HKR, Settings, FlowControl_Off,, "\Q0"
HKR, Settings, FlowControl_Hard,, "\Q3"
HKR, Settings, FlowControl_Soft,, "\Q1"
HKR, Settings, CallSetupFailTimer,, "S7=<#>"
[Siemens_Addreg]
;13.09.02 K.B. serial speed set to 115200, max serial speed set to 115200 at the S55
HKR,, Properties, 1, 00,00,00,00, 3C,00,00,00, 00,00,00,00, 00,00,00,00, 00,00,00,00, 30,00,00,00, 00,C2,01,00, 00,C2,01,00
HKR, Protocol\GSM\GPRS, 1,, "AT<cr>"
HKR, Protocol\GSM\ANALOG_RLP,1,, "AT+CBST=7,,1<cr>" ; or ATB13
;HKR, Protocol\GSM\ANALOG_RLP_14DOT4K,1,, "AT+CBST=14,,1<cr>" ; or ATB15
;HKR, Protocol\GSM\V110_2DOT4K,1,, "AT+CBST=68,,1<cr>" ; or ATB25
HKR, Protocol\GSM\V110_4DOT8K,1,, "AT+CBST=70,,1<cr>" ; or ATB27
HKR, Protocol\GSM\V110_9DOT6K,1,, "AT+CBST=71,,1<cr>" ; or ATB29
HKR, Protocol\GSM\V110_14DOT4K,1,, "AT+CBST=75,,1<cr>" ; or ATB31
; responses
[Siemens_Addreg_Responses]
HKR, Responses, "<cr><lf>OK<cr><lf>", 1, 00, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>ERROR<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>RING<cr><lf>", 1, 08, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>NO CARRIER<cr><lf>", 1, 04, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>NO DIALTONE<cr><lf>", 1, 05, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>BUSY<cr><lf>", 1, 06, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT<cr><lf>", 1, 02, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 2400<cr><lf>", 1, 02, 00, 60,09,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 4800<cr><lf>", 1, 02, 00, c0,12,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 9600<cr><lf>", 1, 02, 00, 80,25,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 14400<cr><lf>", 1, 02, 00, 40,38,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 2400/RLP<cr><lf>", 1, 02, 0a, 60,09,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 4800/RLP<cr><lf>", 1, 02, 0a, c0,12,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 9600/RLP<cr><lf>", 1, 02, 0a, 80,25,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 14400/RLP<cr><lf>", 1, 02, 00, 40,38,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>NO ANSWER<cr><lf>", 1, 07, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 16800<cr><lf>", 1, 02, 00, A0,41,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 19200<cr><lf>", 1, 02, 00, 00,4B,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 21600<cr><lf>", 1, 02, 00, 60,54,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 24000<cr><lf>", 1, 02, 00, C0,5D,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 26400<cr><lf>", 1, 02, 00, 20,67,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 28800<cr><lf>", 1, 02, 00, 80,70,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 38400<cr><lf>", 1, 02, 00, 00,96,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 57600<cr><lf>", 1, 02, 00, 00,E1,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 115200<cr><lf>", 1, 02, 00, 00,C2,01,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 16800/RLP<cr><lf>", 1, 02, 00, A0,41,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 19200/RLP<cr><lf>", 1, 02, 00, 00,4B,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 21600/RLP<cr><lf>", 1, 02, 00, 60,54,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 24000/RLP<cr><lf>", 1, 02, 00, C0,5D,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 26400/RLP<cr><lf>", 1, 02, 00, 20,67,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 28800/RLP<cr><lf>", 1, 02, 00, 80,70,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 38400/RLP<cr><lf>", 1, 02, 00, 00,96,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 57600/RLP<cr><lf>", 1, 02, 00, 00,E1,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 115200/RLP<cr><lf>", 1, 02, 00, 00,C2,01,00, 00,00,00,00
HKR, Responses, "0<cr>", 1, 00, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "1<cr>", 1, 02, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "2<cr>", 1, 08, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "3<cr>", 1, 04, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "4<cr>", 1, 03, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "6<cr>", 1, 05, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "7<cr>", 1, 06, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "8<cr>", 1, 07, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "10<cr>", 1, 02, 00, 60,09,00,00, 00,00,00,00
HKR, Responses, "30<cr>", 1, 02, 00, C0,12,00,00, 00,00,00,00
HKR, Responses, "32<cr>", 1, 02, 00, 80,25,00,00, 00,00,00,00
HKR, Responses, "47<cr>", 1, 02, 00, 60,09,00,00, 00,00,00,00
HKR, Responses, "48<cr>", 1, 02, 00, C0,12,00,00, 00,00,00,00
HKR, Responses, "49<cr>", 1, 02, 00, 80,25,00,00, 00,00,00,00
HKR, Responses, "33<cr>", 1, 02, 00, 40,38,00,00, 00,00,00,00
HKR, Responses, "50<cr>", 1, 02, 00, 40,38,00,00, 00,00,00,00
;--- begin FAX settings ---
[Siemens_Addreg_FaxStd]
HKR, Fax, ResetCommand,, "AT&FS0=0E0V1Q0"
HKR, Fax, SetupCommand,, "ATS7=255&D2\Q1"
; use FAX CLASS 1
;HKR, Fax, FixModemClass,, "1"
; set serial line speed in FAX mode
;HKR, Fax, FixSerialSpeed,, "19200"
[Strings]
;
; Non-Localizable Strings
;
REG_SZ = 0x00000000
REG_MULTI_SZ = 0x00010000
REG_EXPAND_SZ = 0x00020000
REG_BINARY = 0x00000001
REG_DWORD = 0x00010001
SERVICEROOT = "System\CurrentControlSet\Services"
;
; Localizable Strings
;
Siemens.DeviceDesc0 = "Siemens Mobile Phone USB Modem"
DiskId1 = "Siemens Mobile Phone USB Modem Installation Disk"
S_Mfg = "Siemens AG"
S_Povider = "Siemens AG"
и inf файл который устройство создает тоже приведу ;
; Copyright © 2004 Siemens AG
;
[Version]
Signature=$Windows95$
Class=USB
ClassGUID={36fc9e60-c465-11cf-8056-444553540000}
Provider=%S_Provider%
DriverVer=06/30/2004,0.71.0.0
[DestinationDirs]
DefaultDestDir=10
WDM.Drvrs=10,SYSTEM32\DRIVERS
WDM.VxD=11
[Manufacturer]
%S_Provider%=Siemens
[Siemens]
%S_Device1%=SiemensUSB,USB\VID_0815&PID_0100&MI_00
%S_Device2%=SiemensUSB_1,USB\VID_0815&PID_0100&MI_01
%S_Device1%=SiemensUSB,USB\VID_0815&PID_0100
%S_Device1%=SiemensUSB,USB\VID_0cc4&PID_0816&MI_00
%S_Device2%=SiemensUSB_1,USB\VID_0cc4&PID_0816&MI_01
%S_Device1%=SiemensUSB,USB\VID_0cc4&PID_0815
; Siemens VID=11F5
%S_Device1%=SiemensUSB,USB\VID_11F5&PID_0003&MI_00
%S_Device2%=SiemensUSB_1,USB\VID_11F5&PID_0003&MI_01
%S_Device1%=SiemensUSB,USB\VID_11F5&PID_0003
%S_Device1%=SiemensUSB,USB\VID_11F5&PID_0815
[SiemensUSB]
CopyFiles=WDM.Drvrs,WDM.VxD
AddReg=SiemensUSB.AddReg
[SiemensUSB.HW]
AddReg=SiemensUSB.AddReg.HW, SiemensUSB.AddReg.Params
[SiemensUSB_1]
CopyFiles=WDM.Drvrs,WDM.VxD
AddReg=SiemensUSB.AddReg
[SiemensUSB_1.HW]
AddReg=SiemensUSB.AddReg.HW, SiemensUSB.AddReg.Params_1
[WDM.Drvrs]
siusbm98.sys,,,0x00000020
;ccport.sys,,,0x00000020
[WDM.VxD]
;wdmmdmld.vxd,,,0x00000020
[SiemensUSB.AddReg]
HKR,,DevLoader,0,*ntkern
HKR,,NTMPDriver,,"siusbm98.sys,ccport.sys"
HKLM,"SYSTEM\CurrentControlSet\Services\usb65mod",,,
HKLM,"SYSTEM\CurrentControlSet\Services\usb65mod\Parameters",,,
[SiemensUSB.AddReg.HW]
HKR,,ChildID,2,"USB\Siemensmpkit"
; the following comment is important for uninstalling/updating the driver
; !!! don't change this line !!!
; an additional key to identify our modem "{9548D0D8-0733-4abc-8841-39743D40ED88}"
HKR,, SiemensPrivateModemGuid,1, D8, D0, 48, 95, 33, 07, bc, 4a, 88, 41, 39, 74, 3D, 40, ED, 88
[SiemensUSB.AddReg.Params]
; the following keys will be written in the registry by the install program
; other default params
HKR,,RequestTimeout,0x00010001, 2500
HKR,,DataInPipe,0x00010001, 0x81
HKR,,DataOutPipe,0x00010001, 0x02
HKR,,IntInPipe,0x00010001, 0x83
HKR,,Instance,0x00010001, 0
HKR,,TimerInterval,0x00010001, 10
[SiemensUSB.AddReg.Params1]
; the following keys will be written in the registry by the install program
HKR,,RequestTimeout,0x00010001, 2500
HKR,,DataInPipe,0x00010001, 0x85
HKR,,DataOutPipe,0x00010001, 0x06
HKR,,IntInPipe,0x00010001, 0x87
HKR,,Instance,0x00010001, 1
HKR,,TimerInterval,0x00010001, 10
[ControlFlags]
[PreCopySection]
HKR,,NoSetupUI,,1
[SourceDisksNames]
1=%DiskName_Desc%,,0
[SourceDisksFiles]
siusbm98.sys=1
ccport.sys=1
wdmmdmld.vxd=1
[Strings]
S_Provider="Siemens AG"
S_Device1="Siemens Mobile Phone USB Basis Driver"
S_Device2="Siemens Mobile Phone USB Basis Driver (Debug)"
DiskName_Desc="Siemens Mobile Phone USB Modem Installation Disk"
может тут легче найти что он создал и на что он повесился в идеале конечно лудше всего было бы создать именно вируальный ком как в pl2303 он просто сложенее исползует еще vxd и я пока нерешился его править его инф файл ; SERSPL.INF
; Copyright (c) 1999 Prolific Technology
;
; 09/13/2000
[version]
signature="$Windows 95$"
Class=Ports
ClassGUID={4d36e978-e325-11ce-bfc1-08002be10318}
Provider=%Mfg%
; [DestinationDirs]
; SerialPort.Copy = 11 ; \windows\system
; [SourceDiskFiles]
; serport.vxd = 1
; [SourceDisksNames]
; 1="USB to Serial Disk #1","",1
; Drivers
;----------------------------------------------------------
[Manufacturer]
%Mfg%=USB2SERDevices
[USB2SERDevices]
%OURPORTDEVICE%=SerialPort, VID_067B&PID_2303
; COM sections
;----------------------------------------------------------
[SerialPort]
; CopyFiles=SerialPort.Copy
AddReg=SerialPort.AddReg
LogConfig=caa,c34,c3a,c43,c4a,c14,c1a,c23,c2a
; [SerialPort.Copy]
; SerPort.VXD
[SerialPort.AddReg]
HKR,,DevLoader,,*vcomm
HKR,,Enumerator,,serenum.vxd
HKR,,PortDriver,,serspl.vxd
HKR,,USBDriver,,ser9pl.sys
HKR,,Contention,,*vcd
HKR,,ConfigDialog,,serialui.dll
HKR,,DCB,3,1C,00,00,00, 00,C2,01,00, 15,20,00,00, 00,00, 0a,00, 0a,00, 08, 00, 00, 11, 13, 00, 00, 00
HKR,,PortSubClass,1,01
HKR,,EnumPropPages,,"serialui.dll,EnumPropPages"
[c34] ; COM3, IRQ4
ConfigPriority=HARDRECONFIG
IOConfig=3e8-3ef(3ff::)
IRQConfig=S:4
[c3a] ; COM3, any IRQ
ConfigPriority=HARDRECONFIG
IOConfig=3e8-3ef(3ff::)
IRQConfig=S:3,4,5,7,9,10,11,12,14,15
[c43] ; COM4, IRQ3
ConfigPriority=HARDRECONFIG
IOConfig=2e8-2ef(3ff::)
IRQConfig=S:3,5
[c4a] ; COM4, any IRQ
ConfigPriority=HARDRECONFIG
IOConfig=2e8-2ef(3ff::)
IRQConfig=S:3,4,5,7,9,10,11,12,14,15
[caa] ; Any base, any IRQ
ConfigPriority=HARDRECONFIG
IOConfig=8@100-ffff%fff8(3ff::)
IRQConfig=S:3,4,5,7,9,10,11,12,14,15
[c00] ; No resources
ConfigPriority=HARDRECONFIG
IOConfig=0
IRQConfig=S:000-000(000::)
[c14] ; COM1,IRQ4
ConfigPriority=HARDRECONFIG
IOConfig=3f8-3ff(3ff::)
IRQConfig=S:4
[c1a] ; COM1, any IRQ
ConfigPriority=HARDRECONFIG
IOConfig=3f8-3ff(3ff::)
IRQConfig=S:3,4,5,7,9,10,11,12,14,15
[c23] ; COM2, IRQ3
ConfigPriority=HARDRECONFIG
IOConfig=2f8-2ff(3ff::)
IRQConfig=S:3
[c2a] ; COM2, any IRQ
ConfigPriority=HARDRECONFIG
IOConfig=2f8-2ff(3ff::)
IRQConfig=S:3,4,5,7,9,10,11,12,14,15
[Strings]
Mfg="PROLIFIC"
OURPORTDEVICE="USB to Serial Port"
может у когото есть совеременнее нетакой навороченный? |
