Форум программистов «Весельчак У»
  *
Добро пожаловать, Гость. Пожалуйста, войдите или зарегистрируйтесь.
Вам не пришло письмо с кодом активации?

  • Рекомендуем проверить настройки временной зоны в вашем профиле (страница "Внешний вид форума", пункт "Часовой пояс:").
  • У нас больше нет рассылок. Если вам приходят письма от наших бывших рассылок mail.ru и subscribe.ru, то знайте, что это не мы рассылаем.
   Начало  
Наши сайты
Помощь Поиск Календарь Почта Войти Регистрация  
 
Страниц: [1]   Вниз
  Печать  
Автор Тема: Чтение из порта  (Прочитано 6281 раз)
0 Пользователей и 4 Гостей смотрят эту тему.
MikePol
Постоялец

ru
Offline Offline

« : 12-07-2004 07:13 » new

Драйвер считывает  DWORD из порта в/в.
Код:
 
case IOCTL_MYCTL{
 |
 KdPrint))"Mike { Device get IOCTL_MYCTL !!!!!"::;

 if )buff!=NULL:
 |
               ULONG a=0xdc00;
  PULONG pportadr=&pdx->portaddr;
     // *buff=READ_PORT_ULONG)pportadr:;
  *buff=123456;
   KdPrint))"Mike { Device on addrr %0x has %0x   ",*pportadr, *buff::;
  KdPrint))"\n Direct Read { %0x ",READ_PORT_ULONG)a:::;

 _asm |
 int 3h
 "
 //*buff=123456;
 info=4;
 ";



При использовании READ_PORT_ULONG возвращается FFFFFFFF,
SoftIce выдает правильные значения ...
Почему ?
Записан
SlavaI
Главный специалист

ru
Offline Offline

« Ответ #1 : 14-07-2004 06:55 » 

Цитата

 // *buff=READ_PORT_ULONG(pportadr);


Он у тебя закоментирован Отлично . Ну да ладно.

Берешь дебагер и смотришь- на IA-32 это
Код:

kd> u hal!READ_PORT_ULONG
hal!READ_PORT_ULONG{
806ca048 8b542404         mov      edx,[esp+0x4(
806ca04c ed               in       eax,dx
806ca04d c20400           ret      0x4


ты именно это хотел- команду in ?

далее, а почему ты передаешь в ф-цию физический адрес поля структуры?
Код:

pportadr=&pdx->portaddr


после этого pportadr указывает на ВИРТУАЛЬНЫЙ адрес поля структуры. Ясно что нет порта с адресом больше 0x80000000.
Записан
MikePol
Постоялец

ru
Offline Offline

« Ответ #2 : 14-07-2004 11:49 » 

Спасибо. С этим я разобрался.
Но теперь другая проблема: драйвер (PCI) не дает системе загрузиться (вешает)
Но при динамической загрузке драйвера все ОК.
И еще ... при чтении с порта в/в платы  в цикле - загрузка ц.п  - 100%, если запущен WinAmp
и жуткий звук (треск и т.д)  из колонок. А через некоторое время система (ХР) виснет намертво.   Я пробовал WinDriver, DriverStudio и
свой драйвер писал с помощью DDK - результат один и тот же.
Из - за чего это может происходить ?
Записан
MikePol
Постоялец

ru
Offline Offline

« Ответ #3 : 14-07-2004 11:54 » 

Вот исходники : переделанный pci42 из Oney
 // Main program for pci42 driver
// Copyright (C) 1999 by Walter Oney
// All rights reserved

#include "stddcls.h"
#include "driver.h"

NTSTATUS AddDevice(IN PDRIVER_OBJECT DriverObject, IN PDEVICE_OBJECT pdo);
VOID DriverUnload(IN PDRIVER_OBJECT fdo);



BOOLEAN win98 = FALSE;

UNICODE_STRING servkey;
KSPIN_LOCK MySpinLock;


///////////////////////////////////////////////////////////////////////////////





#pragma PAGEDCODE

extern "C" NTSTATUS DriverEntry(IN PDRIVER_OBJECT DriverObject,
   IN PUNICODE_STRING RegistryPath)
   {                     // DriverEntry
   KdPrint((DRIVERNAME " - Entering DriverEntry: DriverObject %8.8lX\n", DriverObject));

   // Insist that OS support at least the WDM level of the DDK we use

   if (!IoIsWdmVersionAvailable(1, 0))
      {
      KdPrint((DRIVERNAME " - Expected version of WDM (%d.%2.2d) not available\n", 1, 0));
      return STATUS_UNSUCCESSFUL;
      }

   // See if we're running under Win98 or NT:

   win98 = FALSE;

#if DBG
   if (win98)
      KdPrint((DRIVERNAME " - Running under Windows 98\n"));
   else
      KdPrint((DRIVERNAME " - Running under NT\n"));
#endif

   // Save the name of the service key

   servkey.Buffer = (PWSTR) ExAllocatePool(PagedPool, RegistryPath->Length + sizeof(WCHAR));
   if (!servkey.Buffer)
      {
      KdPrint((DRIVERNAME " - Unable to allocate %d bytes for copy of service key name\n", RegistryPath->Length + sizeof(WCHAR)));
      return STATUS_INSUFFICIENT_RESOURCES;
      }
   servkey.MaximumLength = RegistryPath->Length + sizeof(WCHAR);
   RtlCopyUnicodeString(&servkey, RegistryPath);
   servkey.Buffer[RegistryPath->Length / 2] = 0;

   // Initialize function pointers

   DriverObject->DriverUnload = DriverUnload;
   DriverObject->DriverExtension->AddDevice = AddDevice;

   DriverObject->MajorFunction[IRP_MJ_CREATE] = DispatchCreate;
   DriverObject->MajorFunction[IRP_MJ_CLOSE] = DispatchClose;
   //DriverObject->MajorFunction[IRP_MJ_READ] = DispatchReadWrite;
//   DriverObject->MajorFunction[IRP_MJ_CLEANUP] = DispatchCleanup;
   //DriverObject->MajorFunction[IRP_MJ_POWER] = DispatchPower;
   DriverObject->MajorFunction[IRP_MJ_PNP] = DispatchPnp;
   //DriverObject->MajorFunction[IRP_MJ_SYSTEM_CONTROL] = DispatchWmi;
   DriverObject->MajorFunction[IRP_MJ_DEVICE_CONTROL]=DispatchControl;
      
   KdPrint(("Mike : Entry Completed "));

   return STATUS_SUCCESS;
   }                     // DriverEntry

///////////////////////////////////////////////////////////////////////////////

#pragma PAGEDCODE

VOID DriverUnload(IN PDRIVER_OBJECT DriverObject)
   {                     // DriverUnload
   PAGED_CODE();
   KdPrint((DRIVERNAME " - Entering DriverUnload: DriverObject %8.8lX\n", DriverObject));
   RtlFreeUnicodeString(&servkey);
   }                     // DriverUnload

///////////////////////////////////////////////////////////////////////////////

NTSTATUS AddDevice(IN PDRIVER_OBJECT DriverObject, IN PDEVICE_OBJECT pdo)
   {                     // AddDevice
   PAGED_CODE();
   KdPrint((DRIVERNAME " - Entering AddDevice: DriverObject %8.8lX, pdo %8.8lX\n", DriverObject, pdo));
       
 
   NTSTATUS status;

   // Create a function device object to represent the hardware we're managing.

   PDEVICE_OBJECT fdo;

   /*ULONG dxsize = (sizeof(DEVICE_EXTENSION) + 7) & ~7;
   ULONG xsize = dxsize ; */
   
   UNICODE_STRING devname;
   RtlInitUnicodeString(&devname, L"\\DosDevices\\PCI42");
   

   status = IoCreateDevice(DriverObject, sizeof(DEVICE_EXTENSION), &devname,
      FILE_DEVICE_UNKNOWN, FILE_DEVICE_SECURE_OPEN, FALSE, &fdo);
   if (!NT_SUCCESS(status))
      {                  // can't create device object
      KdPrint((DRIVERNAME " - IoCreateDevice failed - %X\n", status));
      return status;
      }                  // can't create device object
   
   PDEVICE_EXTENSION pdx = (PDEVICE_EXTENSION) fdo->DeviceExtension;

   // From this point forward, any error will have side effects that need to
   // be cleaned up.

   do
      {                  // finish initialization
      pdx->DeviceObject = fdo;
      pdx->Pdo = pdo;

      // Make a copy of the device name

      pdx->devname.Buffer = (PWCHAR) ExAllocatePool(NonPagedPool, devname.MaximumLength);
      if (!pdx->devname.Buffer)
         {               // can't allocate buffer
         status = STATUS_INSUFFICIENT_RESOURCES;
         KdPrint((DRIVERNAME " - Unable to allocate %d bytes for copy of name\n", devname.MaximumLength));
         break;;
         }               // can't allocate buffer
      pdx->devname.MaximumLength = devname.MaximumLength;
      RtlCopyUnicodeString(&pdx->devname, &devname);

      // Declare the buffering method we'll use for read/write requests

      fdo->Flags |= DO_BUFFERED_IO;

      // Initialize DPC object



      // Link our device object into the stack leading to the PDO
      
      pdx->LowerDeviceObject = IoAttachDeviceToDeviceStack(fdo, pdo);
      if (!pdx->LowerDeviceObject)
         {               // can't attach                        
         KdPrint((DRIVERNAME " - IoAttachDeviceToDeviceStack failed\n"));
         status = STATUS_DEVICE_REMOVED;
         break;
         }               // can't attach

   

      // Clear the "initializing" flag so that we can get IRPs

      fdo->Flags &= ~DO_DEVICE_INITIALIZING;
      }                  // finish initialization
   while (FALSE);

   if (!NT_SUCCESS(status))
      {           // need to cleanup

         KdPrint(("Mike ^  Error on Init "));
      if (pdx->devname.Buffer)
         RtlFreeUnicodeString(&pdx->devname);
      if (pdx->LowerDeviceObject)
         IoDetachDevice(pdx->LowerDeviceObject);
      IoDeleteDevice(fdo);
      }               // need to cleanup
      //if (NT_SUCCESS(status)) KdPrint(("MIke :  AddDevice  is OK "));

   return status;
   }                     // AddDevice

///////////////////////////////////////////////////////////////////////////////

#pragma LOCKEDCODE

NTSTATUS CompleteRequest(IN PIRP Irp, IN NTSTATUS status, IN ULONG_PTR info)
   {                     // CompleteRequest
   Irp->IoStatus.Status = status;
   Irp->IoStatus.Information = info;
   IoCompleteRequest(Irp, IO_NO_INCREMENT);
   return status;
   }                     // CompleteRequest

///////////////////////////////////////////////////////////////////////////////

#pragma PAGEDCODE

NTSTATUS DispatchPnp(PDEVICE_OBJECT fdo, PIRP Irp)
   {                     // DispatchPnp
   PAGED_CODE();
   PDEVICE_EXTENSION pdx = (PDEVICE_EXTENSION) fdo->DeviceExtension;
   
 
    PIO_STACK_LOCATION stack = IoGetCurrentIrpStackLocation(Irp);
    ULONG fcn = stack->MinorFunction;
   
   switch (fcn) {
    case  IRP_MN_START_DEVICE:
       {  PCM_PARTIAL_RESOURCE_LIST raw, translated;
            raw = &stack->Parameters.StartDevice.AllocatedResources->List[0].PartialResourceList;
             translated = &stack->Parameters.StartDevice.AllocatedResourcesTranslated->List[0].PartialResourceList;
          return StartDevice(fdo,raw,translated);
          break;
       }
    case  IRP_MN_REMOVE_DEVICE:
       {
        KdPrint((" MIke : IRP_MN_STOP_DEVICE"));
          StopDevice(fdo,FALSE);
        RemoveDevice(fdo);
        return STATUS_SUCCESS;
        break;
       }
   
    default:
       {
          IoSkipCurrentIrpStackLocation(Irp);
             return IoCallDriver(pdx->LowerDeviceObject, Irp);
       }
   }
   
     
  }




                        // DispatchPnp

/*NTSTATUS DispatchPower(PDEVICE_OBJECT fdo, PIRP Irp)
   {                     // DispatchPower
   PAGED_CODE();
   PDEVICE_EXTENSION pdx = (PDEVICE_EXTENSION) fdo->DeviceExtension;
   return GenericDispatchPower(pdx->pgx, Irp);
   }                     // DispatchPower

NTSTATUS DispatchWmi(PDEVICE_OBJECT fdo, PIRP Irp)
   {                     // DispatchWmi
   PAGED_CODE();
   PDEVICE_EXTENSION pdx = (PDEVICE_EXTENSION) fdo->DeviceExtension;
   IoSkipCurrentIrpStackLocation(Irp);
   return IoCallDriver(pdx->LowerDeviceObject, Irp);
   }                     // DispatchWmi */

///////////////////////////////////////////////////////////////////////////////

#pragma PAGEDCODE

VOID RemoveDevice(IN PDEVICE_OBJECT fdo)
   {                     // RemoveDevice
   PAGED_CODE();
   PDEVICE_EXTENSION pdx = (PDEVICE_EXTENSION) fdo->DeviceExtension;
   NTSTATUS status;
   
   RtlFreeUnicodeString(&pdx->devname);

   if (pdx->LowerDeviceObject)
      IoDetachDevice(pdx->LowerDeviceObject);

   IoDeleteDevice(fdo);
   }                     // RemoveDevice

#pragma PAGEDCODE            // force inline functions into locked code

NTSTATUS DispatchControl(PDEVICE_OBJECT fdo, PIRP Irp)
{

  PAGED_CODE();
  KIRQL irql=KeGetCurrentIrql();
 
  KdPrint(("Mikee D IO CTL "));
 
  PDEVICE_EXTENSION pdx =
    (PDEVICE_EXTENSION) fdo->DeviceExtension;
  NTSTATUS status = STATUS_SUCCESS;
  ULONG info = 0;

  PIO_STACK_LOCATION stack = IoGetCurrentIrpStackLocation(Irp);
  ULONG cbin =
    stack->Parameters.DeviceIoControl.InputBufferLength;
  ULONG cbout =
    stack->Parameters.DeviceIoControl.OutputBufferLength;

  ULONG code =
    stack->Parameters.DeviceIoControl.IoControlCode;
   
  ULONG *buff= (PULONG) Irp->AssociatedIrp.SystemBuffer;
  ULONG inbuff=*buff;

  KdPrint(("MIke : Input Buffer Length = %d OutPut buffer Length = %d   COde = %d " ,cbin,cbout,code));
 
  status = STATUS_SUCCESS;
 
  switch (code) {
     case IOCTL_MYCTL:
        {
           KdPrint(("Mike : Device get IOCTL_MYCTL !!!!!"));

           if (buff!=NULL)
           {
            *buff=READ_PORT_ULONG((PULONG) (pdx->portaddr+(inbuff-1)*4));
             KdPrint(("Mike : Device on addrr %0x has %0x   ",(pdx->portaddr+(inbuff-1)*4), *buff));
               info=4;
           }
           else status=STATUS_INVALID_PARAMETER;
           break;
         }
     case  IOCTL_WRITE_DWORD:
        {  
             UCHAR number=(UCHAR) (inbuff>>8);
          UCHAR bit= (UCHAR) (inbuff);
          UCHAR tempstate= (UCHAR) (READ_PORT_ULONG((PULONG) (pdx->portaddr+(number-1)*4))>>24) ;
          KdPrint(("Last State %d",tempstate));
          KdPrint(( "READ_PORT_ULONG((PULONG)   %0x",READ_PORT_ULONG((PULONG) 0xdc00))) ;
             UCHAR mask=1;
          mask=mask<<bit;
          KdPrint(("Mask after << = %d",mask));
          mask=255-mask;
          KdPrint(("Mask after != %d ",mask));
          tempstate=tempstate&mask;
          ULONG outstate=tempstate;
          KdPrint((" Mask = %d Outstate = tempstate = %d ",mask, outstate));
             outstate=outstate<<24;
             
          WRITE_PORT_ULONG((PULONG) (pdx->portaddr+(number-1)*4),outstate);
         
          KdPrint(("Mike : INB = %d low %d hi %d number %d bit %d ", inbuff, inbuff>>8 ,inbuff & 0x000000FF,number, bit  ));
          KdPrint(("MIke: tempstate is %d on address %d ",outstate,pdx->portaddr+(number-1)*4));
          break;
        }
     default: KdPrint(("Mike:Device get Anything, but not My control"));
  }

 

 
  //if (pdx->portbase!=NULL) DbgPrint("Port base = %0x ", *((PULONG) pdx->portbase));
 

  /* KeAcquireSpinLock(&MySpinLock,&irql);
  KeReleaseSpinLock(&MySpinLock,irql); */
  return CompleteRequest(Irp, status, info);
  }


//////////////////////////////////////////////////////////////////////////////////////////

// Read/Write request processors for pci42 driver
// Copyright (C) 1999 by Walter Oney
// All rights reserved

#include "stddcls.h"
#include "driver.h"

//VOID OnCancelReadWrite(PDEVICE_OBJECT fdo, PIRP Irp);


///////////////////////////////////////////////////////////////////////////////





///////////////////////////////////////////////////////////////////////////////

#pragma PAGEDCODE

NTSTATUS DispatchCreate(PDEVICE_OBJECT fdo, PIRP Irp)
   {                     // DispatchCreate
   PAGED_CODE();
   KdPrint((DRIVERNAME " - IRP_MJ_CREATE\n"));
   PDEVICE_EXTENSION pdx = (PDEVICE_EXTENSION) fdo->DeviceExtension;

   PIO_STACK_LOCATION stack = IoGetCurrentIrpStackLocation(Irp);

   NTSTATUS status = STATUS_SUCCESS;
   InterlockedIncrement(&pdx->handles);
   return CompleteRequest(Irp, status, 0);
   }                     // DispatchCreate


///////////////////////////////////////////////////////////////////////////////

#pragma PAGEDCODE

NTSTATUS DispatchClose(PDEVICE_OBJECT fdo, PIRP Irp)
   {                     // DispatchClose
   PAGED_CODE();
   KdPrint((DRIVERNAME " - IRP_MJ_CLOSE\n"));
   PDEVICE_EXTENSION pdx = (PDEVICE_EXTENSION) fdo->DeviceExtension;
   PIO_STACK_LOCATION stack = IoGetCurrentIrpStackLocation(Irp);
   InterlockedDecrement(&pdx->handles);
   return CompleteRequest(Irp, STATUS_SUCCESS, 0);
   }                     // DispatchClose

///////////////////////////////////////////////////////////////////////////////






#pragma PAGEDCODE

NTSTATUS StartDevice(PDEVICE_OBJECT fdo, PCM_PARTIAL_RESOURCE_LIST raw, PCM_PARTIAL_RESOURCE_LIST translated)
   {                     // StartDevice
   NTSTATUS status=STATUS_SUCCESS;
   PDEVICE_EXTENSION pdx = (PDEVICE_EXTENSION) fdo->DeviceExtension;

   // Identify the I/O resources we're supposed to use.
   
   KdPrint(("Mike : Entry  Start Device "));
   
   


   PHYSICAL_ADDRESS portbase;
   BOOLEAN gotport = FALSE;
   
   if (!translated)
      return STATUS_DEVICE_CONFIGURATION_ERROR;      // no resources assigned??

   PCM_PARTIAL_RESOURCE_DESCRIPTOR resource = translated->PartialDescriptors;
   ULONG nres = translated->Count;
    KdPrint((" N resourse %d \n", nres));
   for (ULONG i = 0; i < nres; ++i, ++resource)
      {                  // for each resource
      switch (resource->Type)
         {               // switch on resource type

      case CmResourceTypePort:
         portbase = resource->u.Port.Start;
         pdx->nports = resource->u.Port.Length;
         KdPrint((DRIVERNAME " - I/O resource PORT %d\n", portbase));
         pdx->mappedport = (resource->Flags & CM_RESOURCE_PORT_IO) == 0;
         gotport = TRUE;

         break;
   
   
      default:
         KdPrint((DRIVERNAME " - Unexpected I/O resource type %d\n", resource->Type));
         break;
         }               // switch on resource type
      }                  // for each resource

   if (!(TRUE
      && gotport
      ))
      {
      KdPrint((DRIVERNAME " - Didn't get expected I/O resources\n"));
      return STATUS_DEVICE_CONFIGURATION_ERROR;
      }

      pdx->portbase = (PUCHAR) portbase.QuadPart;
      pdx->portaddr = portbase.LowPart;
      KdPrint((DRIVERNAME " MIke   -  PortADDR  %0x  My  ", pdx->portaddr ));


//   ResetDevice(pdx);         // reset the device

   
   if (!NT_SUCCESS(status))
      {
      KdPrint((DRIVERNAME " - IoConnectInterrupt failed - %X\n", status));
      if (pdx->portbase && pdx->mappedport)
         MmUnmapIoSpace(pdx->portbase, pdx->nports);
      pdx->portbase = NULL;
      return status;
      }

   // Initialize the device

//   KeSynchronizeExecution(pdx->InterruptObject, (PKSYNCHRONIZE_ROUTINE) SetupDevice, pdx);

   return status;
   }                     // StartDevice

///////////////////////////////////////////////////////////////////////////////

/*#pragma LOCKEDCODE

VOID StartIo(IN PDEVICE_OBJECT fdo, IN PIRP Irp)
   {                     // StartIo
   PDEVICE_EXTENSION pdx = (PDEVICE_EXTENSION) fdo->DeviceExtension;
   PIO_STACK_LOCATION stack = IoGetCurrentIrpStackLocation(Irp);
   NTSTATUS status = IoAcquireRemoveLock(&pdx->RemoveLock, Irp);
   if (!NT_SUCCESS(status))
      {
      CompleteRequest(Irp, status, 0);
      return;
      }

   // Short-circuit a read for zero bytes

   if (!stack->Parameters.Read.Length)
      {                  // nothing to do
      StartNextPacket(&pdx->dqReadWrite, fdo);
      CompleteRequest(Irp, STATUS_SUCCESS, 0);
      IoReleaseRemoveLock(&pdx->RemoveLock, Irp);
      return;
      }                  // nothing to do

   // Save description of current request in the device extension

   pdx->buffer = (PUCHAR) Irp->AssociatedIrp.SystemBuffer;
   pdx->nbytes = stack->Parameters.Read.Length;
   pdx->numxfer = 0;

   // See if an input byte is already available. After this first byte, we wait for
   // an interrupt to tell us the next byte is available.


   }                     // StartIo

/////////////////////////////////////////////////////////////////////////////// */

#pragma PAGEDCODE

VOID StopDevice(IN PDEVICE_OBJECT fdo, BOOLEAN oktouch /* = FALSE */)
   {                     // StopDevice
   PDEVICE_EXTENSION pdx = (PDEVICE_EXTENSION) fdo->DeviceExtension;
   
   KdPrint((" MIke : In Stop Device  "));

   if (pdx->portbase && pdx->mappedport)
      MmUnmapIoSpace(pdx->portbase, pdx->nports);
   pdx->portbase = NULL;
   }                     // StopDevice

///////////////////////////////////////////////////////////////////////////////
Записан
Страниц: [1]   Вверх
  Печать  
 

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines