Форум программистов «Весельчак У»
  *
Добро пожаловать, Гость. Пожалуйста, войдите или зарегистрируйтесь.
Вам не пришло письмо с кодом активации?

  • Рекомендуем проверить настройки временной зоны в вашем профиле (страница "Внешний вид форума", пункт "Часовой пояс:").
  • У нас больше нет рассылок. Если вам приходят письма от наших бывших рассылок mail.ru и subscribe.ru, то знайте, что это не мы рассылаем.
   Начало  
Наши сайты
Помощь Поиск Календарь Почта Войти Регистрация  
 
Страниц: [1]   Вниз
  Печать  
Автор Тема: Установка дров Ati Radeon 9600 SE под Linux ASP 9.0  (Прочитано 15142 раз)
0 Пользователей и 1 Гость смотрят эту тему.
WHiTeSnAKe
Гость
« : 14-09-2004 13:16 » 

скачал последние драйвера с http://ati.com устанавливаю, конфигурирую, после чего он говорит перезапустите X server, перезапускаю и усё он моргает где то раз 5 а потом выдаёт сообщение мол не хотите ли запустить конфигуратор.... запускаю, он ставит обратно дефолтный драйвер Жаль помогите пожалуйста разобраться в чём дело...
Записан
Антон (LogRus)
Глобальный модератор

ru
Offline Offline
Пол: Мужской
Внимание! Люблю сахар в кубиках!


WWW
« Ответ #1 : 14-09-2004 13:26 » 

WHiTeSnAKe, пожалуста раскажи по подробней у меня проблем никаких не возникало не разу.
Опиши что ты делал желательно разбавить описание сообщениями которые тебе выдавали при установке. А вообще кажется всё описанно на сайте производителя.
Записан

Странно всё это....
WHiTeSnAKe
Гость
« Ответ #2 : 14-09-2004 13:56 » 

захожу в терминал по рутом и пишу

rpm -Uh  fglrx-4.3.0-3.12.0.i386.rpm --replacefiles (без реплэйса ругается --> файл /usr/X11R6/lib/libGL.so.1.2 из устанавливаемого пакета fglrx-4.3.0-3.12.0 конфликтует с файлом из пакета XFree86-Mesa-libGL-4.3.0-2 )

Specify the mouse port type. Choose one from the following list:

<--------- то что я выбираю

 1.  Serial Port
 2.  PS/2 or USB with PS/2 protocol  <---------
 3.  Inport Bus

Specify the mouse model. Choose one from the following list:
 
 1.  PS/2 Mouse (X11 generic ps/2 mouse driver)
 2.  PS/2 Wheel Mouse (X11 generic ps/2 wheel mouse driver)
 3.  Microsoft Intellimouse (PS2)
 4.  Microsoft IntelliMouse Explorer (PS2)
 5.  Kensington ThinkingMouse (PS2)
 6.  Logitech MouseManPlus (PS2)
 7.  Alps Glidepoint PS/2 Touchpad
 8.  Genius NetMouse + ( уменя MX-700 USB а здесь USB нету Жаль ) <---------
 9.  Genius NetScroll

If your mouse has only two buttons, it is recommended that you enable
Emulate3Buttons.
 
Do you want to enable Emulate3Buttons (y/n)? [n] N <---------

Now give the full device name that the mouse is connected to, for example
/dev/tty00 or /dev/mouse or /dev/psaux (includes IBM Laptops).
 
Mouse device: [/dev/mouse] пишу-> Logitech MX-700 <---------

Please select one of the following keyboard types that is the better
description of your keyboard. If nothing really matches,
choose 1 (Generic 101-key PC)
 
 1.  Generic 101-key PC
 2.  Generic 102-key (Intl) PC
 3.  Generic 104-key PC + <---------
 4.  Generic 105-key (Intl) PC
 5.  Dell 101-key PC
 6.  Everex STEPnote
 7.  Keytronic FlexPro
 8.  Microsoft Natural
 9.  Northgate OmniKey 101
10.  Winbook Model XP5
11.  Japanese 106-key
12.  PC-98xx Series
 
Enter a number to choose the keyboard type: [1] выбираю 3 <---------

19.  Polish
20.  Portugese
21.  Russian  <---------
22.  Swedish
23.  Thai
24.  PC-98xx Series
 
Press [Enter] for the next page or
enter the number for your keyboard layout country: 21 <---------

Quad Buffer Stereo ("Active Stereo"):
 
This driver does support Quad Buffer Stereo ("Active Stereo")
in combination with a CRT monitor (refresh rate abt. 100 to 120 Hz)
and the appropiate stereo viewing subsystem hardware. This can be
e.g. a shutter glasses system (infrared or wired) or an active
polarisation device paired with passive stereo polarization glasses.
 
Do you want to enable "Quad Buffer Stereo" (y/n)? [n] N <---------

Do you want to enable TV out (y/n)? [n] N

 1.  Single Head    (1 screen, second dark) <---------
 2.  Laptop Mode    (Ability to toggle between internal / external screen)
 3.  Clone Mode     (2 screens - same content)
 4.  Big Desktop    (2 screens - one framebuffer)
 5.  Dual Head      (2 screens - two drivers)

   hsync in kHz; monitor type with characteristic modes
 1.  31.5       ; up to  640x480  @ 60 Hz  (VGA)
 2.  31.5 - 37.9; up to  800x600  @ 60 Hz (SVGA)
 3.  31.5 - 48.4; up to 1024x768  @ 60 Hz  (XGA)
 4.  31.5 - 60.0; up to 1024x768  @ 75 Hz  (XGA)
 5.  31.5 - 68.7; up to 1024x768  @ 85 Hz  (XGA)  <---------
 6.  31.5 - 80.5; up to 1280x1024 @ 75 Hz (SXGA)
 7.  31.5 - 91.1; up to 1280x1024 @ 85 Hz (SXGA)
 8.  Enter your own horizontal sync range

 1.  20 - 60 (e.g. slow scan flat panels with DVI cable)
 2.  50 - 70 (VGA)
 3.  60 - 75
 4.  60 - 85  <---------
 5.  60 - 100
 6.  Specify your own vertical sync range

The default resolution that the server will start-up with will be the first
listed mode that can be supported by the monitor and card.
Currently it is set to:
 
"640x480" for 24-bit
 
Modes that cannot be supported due to monitor or clock constraints will
be automatically skipped by the server.
 
 1.  Change the modes for 24-bit (24-bit color)
 2.  The modes are OK, continue. <-------

You can have a virtual screen (desktop), which is screen area that is larger
than the physical screen and which is panned by moving the mouse to the edge
of the screen. The largest resolution in the modelist is used for any of the
listed resolution with less dimensions. Each color depth can have a
differently-sized virtual screen. Virtual screens resolutions are set
for each color depth separately.
 
 
Note: This grafics adapter will always select the maximum
x and y resolution as the default virtual desktop resolution.
This complies with general X11 specifications. see "man XF86Config".
 
Do you want to use a virtual desktop where the dimensions are bigger
than your maximum x and y screen resolution? (y/n) [n] Y <---------

Enter your desired virtual desktop width: [640..2048] 1024 <---------
 
Enter your desired virtual desktop height: [480..2048] 768 <---------

1.  no restrictions - any user has access to the OpenGL ICD
 2.  limited to group 'users' - only group members can access the OpenGL ICD
 3.  limited to group 'root' - only group members can access the OpenGL ICD
 4.  limited to group 'video' - only group members can access the OpenGL ICD
 5.  limited to group 'dri' - only group members can access the OpenGL ICD
 
Enter the number for your default user restrictions: [1] 1 <--------

 1.  Default
 2.  Individual Configuration of Capabilities
 3.  Maya
 4.  SOFTIMAGE|XSI
 5.  SOFTIMAGE|3D
 6.  Houdini 4.0
 7.  Houdini 5.0
 8.  Houdini 5.5
 
Enter the number for your profile: [1] 1 <--------

Do you want to initialize xfree86-dga (y/n)? [n] N <--------

Do you want to export pseudo color visuals (y/n)? [n] N <-------

Do you want to synchronize buffer swaps
with the vertical sync signal (y/n)? [n] N <--------

Please select multi sample visuals you want to share:
 
 1 = All (Visuals for 2,4 and 6 Samples per Pixel) <--------
 2 = Visuals for 2 Samples per Pixel
 4 = Visuals for 4 Samples per Pixel
 6 = Visuals for 6 Samples per Pixel

Do you want to force multi sample visuals
for every OpenGL application? (y/n)? [n] N <---------

Disable FSAA Gamma (y/n)? [n] N <----------

Customize FSAA Multi Sample Position (y/n)? [n] N <----------

Do you want to use the external AGP GART module (y/n)? [n] N <--------

Do you want to enable "AGP Locked User Pages" (y/n)? [y] Y <---------

If not totally sure about your needs, then please select "0 - default".
 
  0 - default (FireGL workstation boards: fast) <-------------
  1 - fast operation (only for standard gnu C/C++ OpenGL applications)
  2 - compatible operation (for WineX, VM emulators and some profilers)

I am going to write the XF86Config-4 file now. Make sure you don't accidently
overwrite a previously configured one.
 
Shall I write it to '/etc/X11/XF86Config-4' (y/n)? Y <--------
Записан
Антон (LogRus)
Глобальный модератор

ru
Offline Offline
Пол: Мужской
Внимание! Люблю сахар в кубиках!


WWW
« Ответ #3 : 14-09-2004 15:29 » 

у мя также делается.
глянь и напиши пожалуйста что у тебя в логах xserverа пишется они где-то тут /var/log.
Сейчас погляжу чего там в инструкции написано. У меня Gentoo стоит поэтому для установки хватает команды emerge ati Улыбаюсь
Записан

Странно всё это....
WHiTeSnAKe
Гость
« Ответ #4 : 14-09-2004 15:38 » 

XFree86.0.log.old

вот енто то? но там очень много...

в общем вот небольшой кусок...

(--) PCI:*(1:0:0) ATI Technologies Inc unknown chipset (0x4150) rev 0, Mem @ 0xd0000000/28, 0xff7f0000/16, I/O @ 0x9800/8, BIOS @ 0xff7c0000/17
(--) PCI: (1:0:1) ATI Technologies Inc unknown chipset (0x4170) rev 0, Mem @ 0xc0000000/28, 0xff7e0000/16
(II) Addressable bus resource ranges are
   
  • -1   0   0x00000000 - 0xffffffff (0x0) MX
  • [1] -1   0   0x00000000 - 0x0000ffff (0x10000) IX

(II) OS-reported resource ranges:
   
  • -1   0   0xffe00000 - 0xffffffff (0x200000) MX(B)
  • [1] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX
E(B)
   [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX
   [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX
   [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX
   [5] -1   0   0x0000ffff - 0x0000ffff (0x1) IX
   [6] -1   0   0x00000000 - 0x000000ff (0x100) IX
(II) PCI Memory resource overlap reduced 0xf0000000 from 0xf7ffffff to 0xefffffff
(II) Active PCI resource ranges:
   
  • -1   0   0xff9fe000 - 0xff9fefff (0x1000) MX
  • [1] -1   0   0xff9ffc00 - 0xff9ffcff (0x100) MX

   [2] -1   0   0xff8e0000 - 0xff8fffff (0x20000) MX
   [3] -1   0   0xffaff400 - 0xffaff4ff (0x100) MX
   [4] -1   0   0xffaff800 - 0xffaff9ff (0x200) MX
   [5] -1   0   0x20000000 - 0x200003ff (0x400) MX
   [6] -1   0   0xffaffc00 - 0xffafffff (0x400) MX
   [7] -1   0   0xf0000000 - 0xefffffff (0x0) MXO
   [8] -1   0   0xff7e0000 - 0xff7effff (0x10000) MX(B)
   [9] -1   0   0xc0000000 - 0xcfffffff (0x10000000) MX(B)
   [10] -1   0   0xff7c0000 - 0xff7dffff (0x20000) MX(B)
   [11] -1   0   0xff7f0000 - 0xff7fffff (0x10000) MX(B)
   [12] -1   0   0xd0000000 - 0xdfffffff (0x10000000) MX(B)
   [13] -1   0   0x0000b800 - 0x0000b8ff (0x100) IX
   [14] -1   0   0x0000ac00 - 0x0000ac1f (0x20) IX
   [15] -1   0   0x0000c800 - 0x0000c81f (0x20) IX
   [16] -1   0   0x0000dc00 - 0x0000dc0f (0x10) IX
   [17] -1   0   0x0000e000 - 0x0000e003 (0x4) IX
   [18] -1   0   0x0000e400 - 0x0000e407 (0x8) IX
   [19] -1   0   0x0000e800 - 0x0000e803 (0x4) IX
   [20] -1   0   0x0000ec00 - 0x0000ec07 (0x8) IX
   [21] -1   0   0x0000ffa0 - 0x0000ffaf (0x10) IX
   [22] -1   0   0x0000d800 - 0x0000d81f (0x20) IX
   [23] -1   0   0x0000d400 - 0x0000d41f (0x20) IX
   [24] -1   0   0x0000d000 - 0x0000d01f (0x20) IX
   [25] -1   0   0x0000cc00 - 0x0000cc1f (0x20) IX
   [26] -1   0   0x00009800 - 0x000098ff (0x100) IX[B
Записан
@lexB
Гость
« Ответ #5 : 15-09-2004 19:05 » 

а без old есть? проверь подгружается ли модуль ядра при загрузке...

еще вариант:
если до установки дров иксы работали,то берем из файла XF86Config-4 кусок текста с описанием параметров видеокарты
Код:

Section "Device"
    Identifier                          "ATI"
    Driver                              "fglrx"
...
...
...
EndSection

и вставляем это в  старый конфиг (XF86Config) в место старых настроек
Код:

Section "Screen"
    Identifier  "Screen0"
    Device      "ATI"                      
    Monitor     "Monitor0"
    DefaultDepth 24
...
EndSection


главное чтоб идентификатор прописанный в Section "Device" и  Section "Screen" совпадали...
Записан
Volander
Гость
« Ответ #6 : 14-04-2005 07:39 » new

У меня таже проблема, но у меня radeon 9250 начинаю ставить Линух, во время установки работает в текстовом режиме, а послу естановки не может определить тип видео карты, после чего ставит стандартный драйвер, пробовал устанавливать свежий драйвер - не помогает. Помогите, а то уже 60Hz меня скоро добьют. Спасибо
Записан
Страниц: [1]   Вверх
  Печать  
 

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines